○ 5K / 4K + FullHD videos ○ Wifi + GPS ○ 4.0 inch touchscreen LCD ○ 512gb support Read more.
The Nanocam M93 Pro is the first 5K dashcam. With this very high-quality dashcam you will record everything around your car in crystal clear quality. The Nanocam M93 Pro is equipped with virtually all possible features such as a large 4.0-inch touchscreen LCD screen, Wifi and GPS. With the extensive parking mode you can also secure your car while parking and by supporting 512gb Micro SD cards you can also store several days of videos.
The Nanocam M93 Pro is the first dashcam with 5K resolution. This dashcam records videos in widescreen 5160p * 2160p. When you connect the rear camera, the resolution is adjusted to 4K + FullHD. You can also set the resolution lower to store more data on the SD card.
The rear camera films at FullHD 30fps resolution is easily connects to the front dashcam. It is connected with a long cable of 6 meters and the videos are simultaneously stored on the SD card. With the rear camera connected, the resolution of the front camera is automatically adjusted to FullHD.
Through the high-quality 8.0MP image sensor, images are of the best quality even at night. WDR (Wide Dynamic Range) technology ensures that the contrast and brightness of the images are optimally adjusted.
The Nanocam M93 Pro 2K comes standard with a 64gb Micro SD card so you can start recording right away. The dashcam also supports larger Micro SD cards up to 512gb. About 4 hours of video can be stored on the included 64gb card in 4K + FullHD.
In lower FullHD + FullHD resolution and with a 512gb card you can store up to 54 hours of video. With Loop recording, the oldest footage is always automatically overwritten for new footage so the camera always continues recording.
With the large and bright 4.0-inch touch screen LCD screen, operating the menu and viewing recordings is a breeze. The user-friendly menu is available in Dutch and very intuitive. With the adjustable screensaver you can have the screen turn off after a few minutes of driving or show the speed on screen.
The Nanocam M93 Pro is equipped with Wifi making it super easy to view live and saved footage via your smartphone. Using Wifi you can log in to the dashcam within range of the dashcam (+/- 5 meters) and control it via your phone. This eliminates the need to remove the SD card from the camera to view images. The Nanocam M93 Pro uses the KaCam App for iOS (Apple) and Android phones and tablets.
The M93 Pro 2K has a built-in GPS receiver. Because of the GPS, the speed can be displayed on screen and the coordinates of the places where filming was done are kept. This allows you to later use the supplied software to see exactly where certain recordings were made.
To enhance image quality and reduce reflections in the image, you can expand the Nanocam M93 Pro with the optional universal CPL filter (see accessories). This filter acts like Polaroid sunglasses for the lens and can be useful in sunny conditions.
The dashcam comes with two self-adhesive holders, ideal for using the dashcam in multiple cars. The sturdy holder ensures that the dashcam stays in place and that the recordings do not contain unnecessary vibrations. The holder is mounted on the windshield with a 3M sticker and the dashcam is clicked into the holder. The camera can be rotated in all directions to position it properly.
The M93 Pro 2K dashcam features a convenient automatic parking mode with four options:
Time lapse (1fps): The camera films continuously at 1fps Time lapse, including with any rear camera. In this mode, the camera takes a picture every second that is later played back as accelerated video. Time lapse is an economical recording mode which means that the dashcam does not consume too much power and data. Therefore, up to 30 times more videos can be stored on the SD card.
Motion Detection: The camera turns off when you turn off the car ignition and goes into standby mode until a vibration is detected by the G-sensor. In that case, a normal recording of 1 minute is started.
Vibration detection: The dashcam turns off with the ignition and when a vibration is detected, the camera turns on and starts a short recording of 1 minute.
Normal recording: The dashcam continues recording as usual when the car ignition is turned off.
* The automatic parking mode of the M93 Pro 2K works only in combination with the optionally available Nanocam NH03 permanent power supply and cannot be turned on and off manually. Combined with the permanent power supply, the camera automatically goes into park mode when the car ignition is turned off and normal recording begins when you start the car again. So you have nothing to worry about after installation.
Through loop recording, all recordings are saved in shorter fragments of 5 minutes. Once the SD card is full, the oldest videos are automatically deleted and overwritten for new recordings. As a result, the last rides are always stored on the SD card. When a tilling occurs, the current file will be protected so it cannot be overwritten.
This M93 Pro 2K has a wide-angle lens of 150˚ at the front and 150˚ at the rear. This captures a very large area around the car.
The Nanocam M93 Pro 2K dashcam automatically starts filming as soon as power comes on. So simply connect it with the car charger and you have nothing else to worry about. If your car permanently provides power through the cigarette power supply, it is wiser to use the permanent power supply to save the car battery.
Because of the built-in G-sensor, the dashcam records collisions or violent vibrations. Upon impact, images are automatically stored securely so they are not lost. They cannot be overwritten or deleted via the dashcam.
The Nanocam M93 Pro 2K has a built-in microphone so that sound is also recorded. The microphone can be easily turned on and off at the touch of a button.
The date, time and license plate number can be displayed at the bottom of each video. This way, it can later be clearly seen where, when and with which vehicle recordings were made.
This M93 Pro dashcam comes with a convenient dual USB cigarette plug and separate 3.5-meter cable. This leaves you with an extra USB port for charging your phone.
Please note: When connecting to an existing USB port in the car, this USB port must provide at least 2.5A. At lower output, the dashcam will not function or will function poorly.
