Xplore C2 Geo Wifi GPS FullHD dashcam

FullHD 1080p videos

This Xplore C2 Geo Wifi GPS records in high quality FullHD 1080p 30fps with a SONY 2.0MP CMOS sensor. The Xplore C2 Geo Wifi GPS also performs really good at low light conditions.

Xplore Wifi

This Xplore C2 Geo Wifi GPS has built-in Wifi, enabling wireless video transferring between the camera and your iOS and Android phone or tablet. It has a dedicated Xplore app which is available for free in the Appstore and Google Play store.

Waving SOS sensor

Xplore C2 Geo Wifi GPS has an intuitive built-in 'Waving' SOS sensor at the bottom of the camera. One waving movement with your hand underneath the camera starts an emergency recording and makes a snapshot of the current situation. This makes for very safe and fast capturing of any critical moment.

GPS

This Xplore C2 Geo Wifi GPS has a built-in GPS receiver. The current speed is shown in every video and the coördinates are stored on the SD card. Using the available software for Windows and Mac the videos can be shown together with the locations and G-sensor activity. Dashcam Viewer is currently the most reliable and best tested software for this purpose.

Magnetic mount

This C2 Geo Wifi GPS is placed on the windscreen with a firm adhesive mount that doubles as the GPS receiver. The camera is fitted in this mount with a durable magnetic connection. This clever design allows for a clean installation, great GPS reception and videos with little to no vibration. The mount stays on the windscreen and the dashcam can be easily clicked in and out of the mount with one movement.

32gb Micro SD support

This Xplore C2 Geo Wifi GPS supports Micro SD cards up to 32gb (not included). 32gb stores about 4 to 6 hours of FullHD 1080p 30fps recordings.

155˚ lens

The Xplore C2 Geo Wifi GPS has a 155˚ wide view ‘fish-eye’ lens to make sure a big area around the car is visible and captured.

180mAh battery

Xplore C2 Geo Wifi GPS has a small 180mAh built-in battery for safety reasons. The battery makes sure that the current recording can be saved on the SD card in case of a current power loss.

Note that it’s not the purpose of the battery to power the dashcam for a longer time, the battery doesn’t have enough capacity. Every dashcam should therefore always be connected to a power source in order to function properly.

Loop recording

This Xplore C2 Geo Wifi GPS is equipped with loop recording so the dashcam will keep recording even when the SD card is full. Videos are stored in short files of 3, 5 or 10 minutes, when the SD card is full the oldest file will be automatically deleted so there is space for a new file. This way you are sure the last period of time is stored on the SD card, the length of this period depending on the size of the SD card.

Auto start/stop

When powered by the cigarette power plug, the Xplore C2 Geo Wifi GPS will start recording automatically when the car is turned on and will stop recording when the car is turned off. Note that this function will only work in cars that provide power trough the cigarette port when the ignition is on. When power is also provided when the ignition is off, the C2 Geo Wifi GPS will stay on and has to be turned on and off manually.

G-sensor

The built-in G-sensor in this Xplore C2 Geo Wifi GPS registers when you have an accident and in that case saves the current file in a special emergency folder on the SD card. Files in this folder cannot be erased by the loop recording.

Built-in microphone

This Xplore C2 Geo Wifi GPS has a built-in microphone. The microphone can be muted in the menu.

Date and time registration

The current time and date of the recordings are visible in the lower corner of the videos. This setting can also be turned off in the menu.