Micro USB 3-wire hardwire kit to connect your dashcam to the car's battery. Install this hardwire kit to power your dashcam when the car is parked to use the dashcam in parking mode. This kit has four optional low-voltage cut-off settings: 11.8/23.6V, 12.0/24.0V, 12.2/24.4V or 12.4/24.8V. This way the dashcam does not drain your car's battery when the camera records for longer periods of time. This 3-wire type also has an additional third yellow wire for an ACC+ power source to support automatic parking mode with some dashcams (like Mini 0906).
Please check the product video or this website for installation instructions.
Total length: 4m (USB -> 1.5m -> converter > 2.5m -> battery).
Connector: Micro USB
Power input: 12V/24V
Power output: 5V 1.5A
Type: 3-wire (Red+, YellowACC+ and Black-)
Installing a hardwire kit involves making minor adjustments to the fusebox or other power source of your car. There is always a risk of fire or damage involved and this should be done in the supervision of or by someone with technical and electrical experience or a car mechanic. Also please inform with your car dealer if installing this kit has any effects on the warranty on your car.
Good cable. Not too stiff and easy to connect.Posted on 27/01/2019
perfect solution for parking modePosted on 27/01/2019
Acurate quick settlementPosted on 27/01/2019
No clear definition. There are three cables instead of two as the explanation. In newer cars harder to connect.Posted on 26/01/2019
The food is not bad. Wires are well on the light side in resistance but over all safe enough to build a car. Less what I think it is first and foremost the explanation here on the website matches what you get. If you go to the installation issues then get there looks just mentioned which here refers to a (black wire) grounded and a (red line) continuous flow but if your photos look and what you are effectively getting when this order is one with 3 wires, black, red and yellow. How it should be connected to grounding black, red on a fuse that only has power when the engine is running and yellow on a fuse that always has power. What I find even more fun is that this way of connecting (just next to the fuse) is the parent no longer work in any car than five years. (Canbus systems allow not more in the new cars) so you have to buy insurance splitter so you put the splitter on your car insurance, since then an additional fuse in and then this cable into it. you need two splitters and two extra fuses. does not cost much, less than 10 euros if you little look around but it is an extra cost and extra burden for many people because you can not buy here, but also because the total is not listed here. Delivery was fast and well packed.Posted on 25/01/2019
definitely recommended for daschcamPosted on 25/01/2019
Fast delivery! Wanted to use it to power a DAB + receiver, but it bothers them and only with supplied power. Sorry.Posted on 24/01/2019
I unit is built directly very easy !! but the next day again taken out device + wire (very thin lead wire) is not justified to allow continuous electrified vehicle in you (fire) the device is made in China (crap)Posted on 23/01/2019
Ordered and already delivered the day after. So fast. Installation was easy and there are many videos on Youtube about to find. Excellent service Dashcamdeal.Posted on 23/01/2019
Excellent service, fast delivery. Very satisfied with the explanation on the site, definitely worth repeating.Posted on 23/01/2019
I'm glad I ordered it there. Saw as a technical challenges mount, but the clear instruction on Dashcamdeal site helped me through it well. Incidentally, very satisfied with the very detailed website about this dashcam Mini 0806 which I meekocht this diet.Posted on 23/01/2019