Motocam X7 4CH VGA truck dashcam





The Motocam X7 4CH is the perfect combination of a truck camera system and dashcam. The dashcam has four VGA cameras of which three are fitted with infrared LEDs for great night vision. The three front cameras can be fitted in or around the cabin and the rear camera has a 15 meter cable to mount it at the rear of the trailer.
Camera and dashcam combi
This Motocam X7 4CH is a combination of a truck camera system and dashcam. The big 7 inch TFT display - showing all four cameras simultaneously - can be used to have great visibility around the truck. This makes the Motocam X7 4CH the ideal assistant for every professional truck driver, making driving safer and easier.
4x VGA cameras
The Motocam X7 4CH is equipped with four Full HD (1920*1080p) cameras of which three are fitted with infrared LEDs for great nigh vision. The resolution of the camera is very good, making all situations clearly visible. The three LED equipped cameras are waterproof and can be fitted outside of the truck. The fourth front camera is places on the dashboard and will record the road in front of the truck.
Cam 1 VGA 120˚: 3m (front)
Cam 2 VGA 120˚: 6m (left)
Cam 3 VGA 120˚: 6m (right)
Cam 4 VGA 120˚: 15m (rear)
The videos or all cameras are stored on the SD card separately, regardless of which camera is displayed on the LCD screen.
Automatic switch
The three separate cameras with LEDs all have an optional extra power connection that can be connected to the power of the indicator and/or rear light. Using this connection, the camera of the direction in which the vehicle will move is displayed on the LCD screen automatically. For example: when you turn on the right indicator, the camera at the right side of the cabin will be displayed on the screen.
Bluetooth switch
Thanks to the included Bluetooth switch it very easy to change the cameras on the LCD screen. One press on the button changes the camera shown on the screen. This makes driving a lot easier and safer for the driver.
Remote control
Apart from the Bluetooth switch, this Motocam X7 4CH also comes with a complete remote control to control the menu of the camera.
Loop recording
This Motocam X7 4CH is equipped with loop recording so the dashcam will keep recording even when the SD card is full. Videos are stored in short files of 3, 5 or 10 minutes, when the SD card is full the oldest file will be automatically deleted so there is space for a new file. This way you are sure the last period of time is stored on the SD card, the length of this period depending on the size of the SD card.
Auto start/stop
When powered by the cigarette power plug, the Motocam X7 4CH will start recording automatically when the car is turned on and will stop recording when the car is turned off. Note that this function will only work in cars that provide power trough the cigarette port when the ignition is on. When power is also provided when the ignition is off, the Motocam X7 will stay on and has to be turned on and off manually.
G-sensor
The built-in G-sensor in this Motocam X7 4CH registers when you have an accident and in that case saves the current file in a special emergency folder on the SD card. Files in this folder cannot be erased by the loop recording.
Built-in microphone
This Motocam X7 4CH has a built-in microphone. The microphone can be muted in the menu.
Date and time registration
The current time and date of the recordings are visible in the lower corner of the videos. This setting can also be turned off in the menu.
Screensaver
The Motocam X7 4CH has a built in screensaver. The screensaver turns off the screen after 1 minute in order to not distract the driver too much. The camera will keep recording when the screen is turned off and the screen can be reactivated at any time with one press on the Bluetooth or OK button. The interval can be changed in the menu or the function can be completely turned off.
Adhesive mount
The Motocam X7 4CH comes with an adhesive mount for the LCD screen. This makes mounting the screen on the dashboard very easy.
With 4m cigarette power cable
The Motocam X7 4CH comes with 4 meter long 5V/3A cigarette power cable to supply the dashcam with power. The power cable is suitable for 12V and 24V vehicles. The use of another (permanent) power cable it not possible without cutting the standard cable because of the special connectors for power and cameras.
Watching the videos
Watching the recorded videos of the Motocam X7 4CH can be done on the PC or on the dashcam’s own LCD screen. The videos are stored on the SD card as normal MP4 files and can be watched with every standard video player or with the special GPS player.
2x 128gb MicroSD support
The Motocam X7 4CH has two Micro SD slots supporting maximum 128gb Micro SD cards each. In total this amount to about 120 hours of VGA videos.
With digital manual
The English manual for the Motocam X7 4CH can be downloaded under ‘Manual’ in the specifications section on this website.
Product specifications
- EAN
- 2112888679792
- Video quality
- 4x VGA 30fps
- Night vision
- Good
- Wifi
- GPS
- Mount type
- Adhesive
- LCD screen
- 7.0 inch TFT
- Touch screen
- Parking mode (Motion detection)
- Parking mode (Time lapse)
- Parking mode activation
- Cloud trough Wifi hotspot
- Cloud trough Sim card
- ADAS
- HDMI/AV out
- CPL filter option
- Loop recording
- G-sensor
- Microphone
- Speaker
- Memory capacity
- Max 2x 128gb
- Memory type
- Micro SD
- Plug
- Mini USB
- Power supply
- DC
- Battery
- Super capacitor
- Channels
- 4CH
- Front lens angle
- 120˚
- Rear lens angle
- 120˚
- Image sensor
- VGA
- Processor
- STK
- Dimensions
- 18.0*11.2*1.3 cm (monitor)
- Warranty
- 2 years
- Manual
- Download
- What's included?
- 7.0" TFT
Adhesive mount
VGA camera (4x)
Camera mounts
Mounting stickers + screws
Cigar power cable (4m)
Remote control
Bluetooth switch
Cable clips + Tie wraps