Motocam X2V 3CH FullHD truck dashcam
- FullHD + 2x VGA
- 3.0" TFT screen
- Infrared LEDs
- Aluminum case
The Motocam X2V 3CH is a very durable and high quality 3CH truck dashcam with two separate VGA cameras and one FullHD dashcam at the front. On the 3 inch LCD screen all videos can be displayed. The smaller module makes this truck dashcam less visible than alternative truck dashcams which are usually a lot bigger.
FullHD + 2x VGA cameras
The Motocam X2V 3CH is equipped with one FullHD front camera which is fitted in the main body with the LCD screen. The two separate cameras recording in VGA resolution and are fitted with infrared LEDs for great night vision. The separate cameras are connected to the main body with 6m cables and all cameras will recording simultaneously. The video files are stored on the SD card separately.
The separate cameras are waterproof and can the mounted outside of the truck for the best visibility.
Cam 1 FullHD 140˚: In dashcam
Cam 2 VGA 120˚: 6m (left)
Cam 3 VGA 120˚: 6m (right)
3.0" LCD screen
The Motocam X2V 3CH truck dashcam has relatively big 3 inch LCD screen that displays the videos. The cameras can be shown simultaneously (Picture in Picture) or separately.
This Motocam X2V 3CH is equipped with loop recording so the dashcam will keep recording even when the SD card is full. Videos are stored in short files of 3, 5 or 10 minutes, when the SD card is full the oldest file will be automatically deleted so there is space for a new file. This way you are sure the last period of time is stored on the SD card, the length of this period depending on the size of the SD card.
When powered by the cigarette power plug, the Motocam X2V 3CH will start recording automatically when the car is turned on and will stop recording when the car is turned off. Note that this function will only work in cars that provide power trough the cigarette port when the ignition is on. When power is also provided when the ignition is off, the Motocam X2V will stay on and has to be turned on and off manually.
The built-in G-sensor in this Motocam X2V 3CH registers when you have an accident and in that case saves the current file in a special emergency folder on the SD card. Files in this folder cannot be erased by the loop recording.
This Motocam X2V 3CH has a built-in microphone. The microphone can be muted in the menu.
Date and time registration
The current time and date of the recordings are visible in the lower corner of the videos. This setting can also be turned off in the menu.
The Motocam X2V 3CH has a built in screensaver. The screensaver turns off the screen after 1 minute in order to not distract the driver too much. The camera will keep recording when the screen is turned off and the screen can be reactivated at any time with one press on the Bluetooth or OK button. The interval can be changed in the menu or the function can be completely turned off.
The Motocam X2V 3CH comes with a firm adhesive mount for the LCD screen. This makes mounting the screen on the windscreen or dashboard very easy.
With 4m cigarette power cable
The Motocam X2V 3CH comes with 4 meter long 5V/3A cigarette power cable to supply the dashcam with power. The power cable is suitable for 12V and 24V vehicles. The use of another (permanent) power cable it not possible without cutting the standard cable because of the special connectors for power and cameras.
Watching the videos
Watching the recorded videos of the Motocam X2V 3CH can be done on the PC or on the dashcam’s own LCD screen. The videos are stored on the SD card as normal MP4 files and can be watched with every standard video player or with the special GPS player.
128gb MicroSD support
The Motocam X2V 3CH has a Micro SD slot supporting maximum 128gb Micro SD cards. This amount to about 12 hours of VGA videos.