DDPai Hardwire kit Micro USB 3-wire

The DDpai Continuous Power Supply is an intelligent power supply that allows the DDpai dashcams to be used in parking mode. The continuous power supply can be connected to the car's fuse box to provide power to the dashcam when the ignition is turned off. This allows the DDpai dashcams to be used in parking mode.

Multiple protection

The DDpai continuous power supply features multiple built-in protections to protect both the dashcam and car. It has a low-voltage cut off system that cuts power when the car's battery drops below 11.8V. It also has a protection that safeguards the dashcam during spikes in the power supply. With this power supply it is also possible to have the Mini One and 3 turn off at 12.0V or 12.4V, this can be adjusted in the camera's App.

Automatic parking mode

Because the DDpai power supply is connected to two different fuses, the dashcam notices when the ignition of the car is turned on and off. It therefore automatically goes into park mode when the car ignition is switched off and starts again with the regular recording when the car is started.

Installation

View detailed instructions on installing this Continuous Power Supply on this page.

Includes three types of Add-a-fuse plugs

Connecting the power supply is made even easier because 3 types of add-a-fuse plugs are included. This way, only the fuse needs to be replaced for one of these plugs. This is a lot safer than when wires have to be plugged into an existing fuse.

Specifications

Length: 3.5m (Plug -> 2.5m -> Transmitter > 1.0m -> Fuse/Accumulator).
Plug: Micro USB (straight plug)
Input: 12V/24V
Output: 4.7V 1.5A
Battery Protection: 11.8V
Type: 3-wire