Anytek Z1 FullHD Wifi Touch 2CH
- 1080p + 1080p
- 2.35" touch screen
- Wifi / Aluminum body
- 64gb support
1080p + 1080p 30fps videos
This unique Anytek Z1 FullHD Wifi Touch records in 1080p 30fps at the front and rear. It uses the powerful high end V5-DV100 chip to generate the best video quality. The videos at night are also very good for a dashcam is this price range.
FullHD IP68 waterproof rear camera
This Anytek Z1 FullHD Wifi Touch 2CH comes with a rear camera with a 1080p 30fps resolution and is IP68 water and dust proof. It has a 6 meter long cable that is connected to the front camera and trough which it sends its video data and gets its power.
This Anytek Z1 FullHD Wifi Touch 2CH has a durable high quality aluminum body. Because of this body the Z1 FullHD Wifi Touch 2CH is better resistant to extreme temperatures and vibrations. And of course it looks very cool!
2.35 inch touch screen LCD
One of the best parts about this Anytek Z1 FullHD Wifi Touch 2CH is its compact 2.0 inch OLED touch screen LCD. On this LCD screen the menu is easily accessible and the videos can be seen in detail. The Z1 FullHD Wifi Touch 2CH has an optional screensaver that activates after 3 minutes as to not distract the driver too much.
This Anytek Z1 FullHD Wifi Touch 2CH has built-in Wifi, enabling wireless video transferring between the camera and your iOS and Android phone or tablet. It uses the dedicated Anytek app called 'Anzone' which is available for free in the Appstore and Google Play store.
This Z1 FullHD Wifi Touch 2CH is placed on the windscreen with a firm adhesive mount. The camera is fitted in this mount with a durable magnetic connection. This clever design allows for a clean installation and videos with little to no vibration. The mount stays on the windscreen and the dashcam can be easily clicked in and out of the mount with one movement.
64gb Micro SD support
This Anytek Z1 FullHD Wifi Touch 2CH supports Micro SD cards up to 64gb (not included). 64gb stores about 8 to 12 hours of FullHD 1080p 30fps recordings.
140˚ + 140˚ lens
The Anytek Z1 FullHD Wifi Touch 2CH has a 150˚ + 120˚ wide view ‘fish-eye’ lens to make sure a big area around the car is visible and captured.
The Anytek Z1 FullHD Wifi Touch 2CH has a super capacitor instead of a normal battery. Super capacitors are more durable and reliable than Li-ion batteries. They have a longer lifespan and perform better in very high or low temperatures. Note that capacitors only store power for a very short time, meaning that the camera will immediately turn off when the power it turned off and cannot be used without a power source.
This Anytek Z1 FullHD Wifi Touch 2CH is equipped with loop recording so the dashcam will keep recording even when the SD card is full. Videos are stored in short files of 3, 5 or 10 minutes, when the SD card is full the oldest file will be automatically deleted so there is space for a new file. This way you are sure the last period of time is stored on the SD card, the length of this period depending on the size of the SD card.
When powered by the cigarette power plug, the Anytek Z1 FullHD Wifi Touch 2CH will start recording automatically when the car is turned on and will stop recording when the car is turned off. Note that this function will only work in cars that provide power trough the cigarette port when the ignition is on. When power is also provided when the ignition is off, the Z1 FullHD Wifi Touch 2CH will stay on and has to be turned on and off manually.
The built-in G-sensor in this Anytek Z1 FullHD Wifi Touch 2CH registers when you have an accident and in that case saves the current file in a special emergency folder on the SD card. Files in this folder cannot be erased by the loop recording.
This Anytek Z1 FullHD Wifi Touch 2CH has a built-in microphone. The microphone can be muted in the menu.
Date and time registration
The current time and date of the recordings are visible in the lower corner of the videos. This setting can also be turned off in the menu.